AWS EDITION 1, 2009

315

© 2009, AWI, AWMAC, WI - Architectural Woodwork Standards - 1st Edition, October 1, 2009

As may be updated by errata at http://www.awinet.org, http://www.awmac.com, or http://www.woodworkinstitute.com/awserrata/

EXECUTION

DESCRIPTION E C P



6.1

G E N E R A L 

GENERAL (continued)



6.1.1.1

G

A

P

S

GAPS (continued)



6.1.11.3

Of WOOD to WOOD (continued)

6.1.11.3.2 At SHAPED surfaces:

6.1.11.3.2.1 0.075” (1.9mm) in width M

6.1.11.3.2.2 0.050" (1.3 mm) in width M

6.1.11.3.2.3 0.025" (0.65 mm) in width M

6.1.11.4 Of WOOD to NON-WOOD shall not exceed:

6.1.11.4.1 At FLAT and SHAPED surfaces:

6.1.11.4.1.1 0.100" (2.5 mm) in width M

6.1.11.4.1.2 0.075" (1.9 mm) in width M

6.1.11.4.1.3 0.050" (1.3 mm) in width M

6.1.11.5 Of NON-WOOD to NON-WOOD and/or ALL ELEMENTS shall not exceed:

6.1.11.5.1 At FLAT surfaces:

6.1.11.5.1.1 0.100" (2.5 mm) in width M

6.1.11.5.1.2 0.075" (1.9 mm) in width M

6.1.11.5.1.3 0.050" (1.3 mm) in width M

6.1.11.5.2 At SHAPED surfaces:

6.1.11.5.2.1 0.125" (3.2 mm) in width M

6.1.11.5.2.2 0.100" (2.5 mm) in width M

6.1.11.5.2.3 0.075" (1.9 mm) in width M

6.1.12

F L U S H N E S S 

FLUSHNESS of joinery (see Test D illustrations in COMPLIANCE):

6.1.12.1 Of WOOD to WOOD shall not exceed:

6.1.12.1.1 At FLAT surfaces:

6.1.12.1.1.1 0.050" (1.3 mm) M

6.1.12.1.1.2 0.025" (0.65 mm) M

6.1.12.1.1.3 0.012" (0.3 mm) M

6.1.12.1.2 At SHAPED surfaces:

6.1.12.1.2.1 0.075" (1.9 mm) M

6.1.12.1.2.2 0.050" (1.3 mm) M

6.1.12.1.2.3 0.025" (0.65 mm) M

6.1.12.2 Of WOOD to NON-WOOD shall not exceed:

6.1.12.2.1 At FLAT and SHAPED surfaces:

6.1.12.2.1.1 0.075" (1.9 mm) M

6.1.12.2.1.2 0.035" (0.89 mm) M

6.1.12.2.1.3 0.020" (0.5 mm) M

6.1.12.3



Of NON-WOOD to NON-WOOD and/or ALL ELEMENTS shall not exceed:

6.1.12.3.1 At FLAT surfaces:

6.1.12.3.1.1 0.075" (1.9 mm) M

6.1.12.3.1.2 0.035" (0.89 mm) M

6.1.12.3.1.3 0.020" (0.5 mm) M

Section 11 - Countertops (Page 20 of 25)

11