AWS EDITION 1, 2009

38

© 2009, AWI, AWMAC, WI - Architectural Woodwork Standards - 1st Edition, October 1, 2009

As may be updated by errata at http://www.awinet.org, http://www.awmac.com, or http://www.woodworkinstitute.com/awserrata/

38

PRODUCT

SHOP DRAWING RULES (continued)

DESCRIPTION



4.2

S P E C I F I C S E C T I O N R E Q U I R E M E N T S 

SPECIFIC SECTION requirements (continued)



4.2.1

S E C T I O N 6

SECTION 6 - INTERIOR & EXTERIOR MILLWORK (continued)

4.2.1.2

D R A W I N G S

DRAWINGS requirements shall additionally include as applicable:

4.2.1.2.1 TRIM, FRAME, SASH, SCREEN, BLIND, and/or SHUTTER members, drawn in

full (1:1) scale profile.

4.2.1.2.1.1

Members too large to fit on a single sheet may be drawn in

segments, or at half scale (1:2).

4.2.1.2..2

FRAME, SASH, SCREEN, BLIND, and/or SHUTTER construction details drawn

to a minimum 3" = 1'-0" (1:5) scale

4.2.1.2..3

FRAMES in section detail with elevations as necessary for coordination with other

crafts

4.2.1.2..4 SASH, SCREEN, BLIND, and/or SHUTTERS in elevation

4.2.1.2..5 BUILT-UP MEMBERS, drawn in elevation with horizontal and vertical sections

4.2.1.2..6 DETAILED SECTIONS, minimum 1-1/2" = 1'-0" (1:10) scale, of:

4.2.1.2.6.1 Corners

4.2.1.2.6..2 Joints within the woodwork item

4.2.1.2.6..3 Joints between the woodwork item and other trim

4.2.1.2.6..4 Woodwork item meeting features provided by other trades

4.2.1.2.6..5 Joinery

4.2.1.2.6..6 Attachment

4.2.1.2.6..7 Relationships to adjacent trim members or features

4.2.2

S E C T I O N 7

SECTION 7 - STAIRWORK & RAILS, including treads, risers, skirt boards, moldings, newels, and balusters

4.2.2.1 LISTING requirements shall additionally include:

4.2.2.1.1 Related material requirements and specifications

4.2.2.1.2 Handrail brackets and other hardware

4.2.2.2

D R A W I N G S

DRAWINGS requirements shall additionally include as applicable:

4.2.2.2.1 RAILS and TRIM members, shown in full-size profile

4.2.2.2.1.1 Samples may be substituted for section details at manufacturer's option.

4.2.2.2.2 PLAN and ELEVATION views drawn to a minimum 3/4" = 1'-0" (1:20) scale

4.2.2.2.2.1 For each run of stair and section of balustrade

4.2.2.2.3 DETAILED SECTIONS, minimum 1-1/2" = 1'-0" (1:10) scale, of:

4.2.2.2.3.1 Joinery

4.2.2.2.3.2 Attachment

4.2.2.2.3.3 Relationships to adjacent features

4.2.3

S E C T I O N 8 

SECTION 8 - WALL PANELING

4.2.3.1

L I S T I N G S 

LISTING requirements shall additionally include:

4.2.3.1.1 Match and balance of panels to adjacent panels

4.2.3.1.2 Match and balance of panels within an elevation

4.2.3.1.3 Match and balance of panels within a room

4.2.3.1.4 Match and balance of panels to adjacent doors or casework

4.2.3.1.5 Core type and thickness

4.2.3.1.6 Backing or balance sheet

4.2.3.1.7 Edgebanding

Section 1 - Submittals (Page 5 of 9)

1