AWS EDITION 1, 2009

© 2009, AWI, AWMAC, WI - Architectural Woodwork Standards - 1st Edition, October 1, 2009 39

As may be updated by errata at http://www.awinet.org, http://www.awmac.com, or http://www.woodworkinstitute.com/awserrata/

39

PRODUCT

SHOP DRAWING RULES (continued)

DESCRIPTION



4.2

S P E C I F I C S E C T I O N R E Q U I R E M E N T S 

SPECIFIC SECTION requirements (continued)



4.2.3

S E C T I O N 8

SECTION 8 - WALL PANELING (continued)



4.2.3.1

LISTING requirements shall; (continued)

4.2.3.1.8 Related material specifications

4.2.3.2

D R A W I N G S

DRAWINGS requirements shall additionally include as applicable:

4.2.3.2.1 TRIM members, shown in full-size profile

4.2.3.2.2 PLAN and ELEVATION views for each panel location

4.2.3.2.3 DETAILED SECTIONS, minimum 1-1/2" = 1'-0" (1:10) scale, of:

4.2.3.2.3.1 Vertical and horizontal sections

4.2.3.2.3.2 Corner joints, both inside and outside

4.2.3.2.3.3 Panel to panel joints

4.2.3.2.3.4 Panel to base or floor joint

4.2.3.2.3.5 Panel to crown or ceiling joint

4.2.3.2.3.6 Attachment

4.2.3.2.3.7 Hardware

4.2.4

S E C T I O N 9

SECTION 9 - DOORS

4.2.4.1

L I S T I N G S

LISTING requirements shall additionally include:

4.2.4.1.1 Core type and thickness for slab door

4.2.4.1.2 Edgebanding

4.2.4.1.3 Adhesive type

4.2.4.1.4 Match and/or balanced of veneer face to adjacent paneling

4.2.4.1.5 Stile and rail construction

4.2.4.1.5.1 Solid or veneered core

4.2.4.1.5.2 Core type and thickness

4.2.4.1.6 FRAME SCHEDULE, including as applicable:

4.2.4.1.6.1 Opening number and location

4.2.4.1.6.2 Elevation and/or section references

4.2.4.1.6.3 Handing and premachining requirements

4.2.4.1.6.4 Hardware types and locations

4.2.4.1.6.5 Glass lite openings with size and location

4.2.4.1.6.6 Louver openings with type, size, and location

4.2.4.2

D R A W I N G S

DRAWINGS requirements shall additionally include as applicable:

4.2.4.2.1 TRIM members, shown in full-size profile

4.2.4.2.2 MANUFACTURER'S specifications or cut sheet showing construction.

4.2.4.2.3 DETAILED SECTIONS, minimum 1-1/2" = 1'-0" (1:10) scale, of:

4.2.4.2.3.1 Construction Type, 3-, 5-, or 7-ply for slab doors; solid or

veneered for stile and rail

4.2.4.2.3.2 Core type and thickness

4.2.4.2.3.3 Diagram of hardware-blocking locations at slab doors

4.2.4.2.3.4 Stile and rail construction, including stiles, rails, panel raise, and moldings

4.2.4.2.3.5 Stile and rail joints

4.2.4.2.3.6 Louvers and/or lites

Section 1 - Submittals (Page 6 of 9)

1