AWS EDITION 1, 2009

© 2009, AWI, AWMAC, WI - Architectural Woodwork Standards - 1st Edition, October 1, 2009 57

As may be updated by errata at http://www.awinet.org, http://www.awmac.com, or http://www.woodworkinstitute.com/awserrata/

Section 3 - Lumber (Page 8 of 18)

PRODUCT

LUMBER RULES (continued)

These rules are not intended to create a lumber grade; they are only intended to establish the acceptable requirements

and/or characteristics after the architectural woodwork is completed or installed.

DESCRIPTION E C P



4.2a

H A R D W O O D \ 

MATERIAL - HARDWOOD (continued)



4.2a.9

M A X I M U M L E N G T H

MAXIMUM LENGTH (continued)

4.2a.9.10 MAPLE, WHITE

4.2a.9.10.1 2" (51 mm) in width = 14'-10" (4521 mm)

4.2a.9.10.2 3" to 4" (76 mm to 102 mm) in width = 11'-10" (3607 mm)

4.2a.9.10.3 5" (127 mm) in width = 10'-10" (3302 mm)

4.2a.9.10.4 6" to 7" (152 mm to 178 mm) in width = 9'-10" (2997 mm)

4.2a.9.10.5 8" (203 mm) or wider is not usually available.

4.2a.9.11 OAK, RED or WHITE (except Rift or Quarter Sawn)

4.2a.9.11.1 2" (51 mm) in width = 14'-10" (4521 mm)

4.2a.9.11.2 3" to 4" (76 mm to 102 mm) in width = 13'-10" (4216 mm)

4.2a.9.11.3 5" to 6" (127 mm to 152 mm) in width = 11'-10" (3607 mm)

4.2a.9.11.4 7" (178 mm) in width = 9'-10" (2997 mm)

4.2a.9.11.5 8" to 9" (203 mm to 229 mm) in width = 8'-10" (2692 mm)

4.2a.9.12 OAK, RED or WHITE, RIFT or QUARTER SAWN

4.2a.9.12.1 2" to 3" (51 mm to 76 mm) in width = 13'-10" (4216 mm)

4.2a.9.12.2 4" (102 mm) in width = 11'-10" (3607 mm)

4.2a.9.12.3 5" to 6" (127 mm to 152 mm) in width = 9'-10" (2997 mm)

4.2a.9.12.4 7" (178 mm) in width = 7'-10" (2388 mm)

4.2a.9.12.5 8" (203 mm) or wider is not usually available.

4.2a.9.13 POPLAR

4.2a.9.13.1 2" to 6" (51 mm to 152 mm) in width = 15'-10" 4826 mm)

4.2a.9.13.2 7" ( 178 mm) in width = 13'-10" (4216 mm)

4.2a.9.13.3 8" to 9" (203 mm to 229 mm) in width = 12'-10" (3912 mm)

4.2a.9.14 TEAK

4.2a.9.14.1 2" (51 mm) in width = 9'-6" (2896 mm)

4.2a.9.14.2 3" to 4" (76 mm to 102 mm) in width = 8'-6" (2591 mm)

4.2a.9.14.3 5" to 7" (127 mm to 178 mm) in width = 7'-6" (2286 mm)

4.2a.9.14.4 8" (203 mm) or wider is not usually available.

4.2a.9.15 WALNUT, AMERICAN

4.2a.9.15.1 2" (51 mm) in width = 9'-6" (2896 mm)

4.2a.9.15.2 3" to 4" (76 mm to 102 mm) in width = 8'-6" (2591 mm)

4.2a.9.15.3 5" (127 mm) in width = 7'-6" (2286 mm)

4.2a.9.15.4 6" (152 mm) in width = 5'-6" (1676 mm)

4.2a.9.15.5 7" (178 mm) or wider is not usually available.

4.2a.10



OPAQUE FINISH

4.2a.10.1 MATCHING for COLOR is not required when glued for thickness or width.

4.2a.10.2 NATURAL CHARACTERISTICS are allowed only if they are inconspicuous after two coats of

finish.

4.2a.10.3 FILLING of checks, splits, or other open characteristics is the responsibility of the millwork

manufacturer.

3