- Place the base (4 by 8 sheet) on top of the assembled piece completed in step 5, then mark off
and 5 evenly spaced holes on the length and 3 evenly spaced holes along the width.
- Apply wood glue to the surfaces that are in contact then drill in the screws ONE SIDE AT A TIME.
Using a hammer while applying pressure to hit the plywood into place.
A ddit ional S upport for t he Bed St ructure
- Make the following cuts using the 2 by 4 sheets
8
2
2
A pplying t he Pond Lining
- Spread the pond lining around the bed. Make sure that there are no significant air gaps between
the lining and the bed.
