REFERENCES 689
Barr, D.I.H. (1983) A survey of procedures for dimensional analysis. International
Journal of Mechanical Engineering in Education, 11 (3): 147–59.
Bassett, R.H. (1981) The use of physical models in design, in Proceedings of the 7th
European Conference on Soil Mechanics and Foundation Engineering,
Brighton, Vol. 2, British Geotechnical Society, London.
Biglari, B. and Sturm, T.W. (1998) Numerical modelling of flow around bridge
abutments in compound channel. Journal of Hydraulic Engineering, ASCE,
124, No. 2: 156–64.
Burgi, P.H. (ed.) (1988) Model–prototype correlation of hydraulic structures, in
Proceedings of the International Symposium, ASCE, Colorado Springs,
American Society of Civil Engineers, New York.
Bürgisser, M. (1999) Numerische Simulation der freien Wasseroberfläche bei Inge-
nieurbauten, Mitteilungen No. 162, Versuchsanstalt fur Wasserbau, Hydrolo-
gie and Glaziologie, ETH, Zürich.
Chadwick, A., Morfett, J. and Borthwick, M. (2004) Hydraulics in Civil and
Environmental Engineering, 4th edition, Spon Press, London.
Cunge, J.A., Holly Jr, F.M. and Verwey A. (1980) Practical Aspects of Computa-
tional River Hydraulics, Pitman, London.
Dewoolkar, M.M., Ko, H.Y. and Pak, R.Y.S. (1999) Centrifuge modelling of
models of seismic effects on saturated earth structures. Geotechnique, 49, 2:
247–66.
Eickman, G. (1992) Massstabseffekte bei der beginnenden Kavitation, Berichte der
Versuchsanstalt Obernach, No. 69, TU, Munchen.
Finn, W.D.L. (1990) Seismic analysis of embankment dams. Dam Engineering, 1
(1): 59–75.
Fumagalli, E. (1966) Stability of arch dam rock abutments, in Proceedings of the 1st
International Congress of Rock Mechanics, Lisbon, Vol. II, Laboratorio
Nacional de Engenharia Civil, Lisbon.
Haszpra, O. (1979) Modelling Hydroelastic Vibrations, Pitman, London.
ICOLD (1996) Vibration of Hydraulic Equipment for Dams, Bulletin 102, Inter-
national Commission on Large Dams, Paris.
Jeffrey, A. (2003) Applied Partial Differential Equations: An Introduction, Acade-
mic Press/Elsevier, New York.
Knauss, J. (1987) Swirling Flow Problems at Intakes, IAHR Hydraulic Structures
Design Manual, Balkema, Rotterdam.
Ko, H.Y. (1988) Summary of the state-of-the-art in centrifuge model testing, in
Centrifuge in Soil Mechanics, 11–18, Balkema, Rotterdam.
Kobus, H. (ed.) (1980) Hydraulic Modelling, Bulletin 7, German Association for
Water Resources and Land Development.
—— (ed.) (1984) Proceedings of the Symposium on Scale Effects in Modelling
Hydraulic Structures, Technische Akademie, Esslingen.
Mir, R. and Taylor, C.A. (1994) Shaking Table Studies of the Performance of
Gravity Dam Models, Report No. UBCE-EE-94, Earthquake Engineering
Research Centre, University of Bristol.
Novak, P. (1984) Scaling factors and scale effects in modelling hydraulic structures.
General lecture, in Proceedings of the Symposium on Scale Effects in Model-
ling Hydraulic Structures, Technische Akademie, Esslingen, Paper 03: 1–6.
Novak, P. and Cˇábelka, J. (1981) Models in Hydraulic Engineering – Physical Prin-
ciples and Design Applications, Pitman, London.