SolidWorks 2010 Bible
Chapter 21: Working with Drawing Views that are opposite from one another. For example, if you drag at a 45-degree angle, the re ...
Part V: Creating Drawings FIGURE 21.5 Activated drawing views The dotted border in the image to the left shows that the view is ...
Chapter 21: Working with Drawing Views Once you create the loop, you can click the Detail View toolbar button and place the view ...
Part V: Creating Drawings FIGURE 21.7 Aligning a line in a Section View sketch You can also use jogged section lines with the de ...
Chapter 21: Working with Drawing Views FIGURE 21.8 Default and jogged Section Views FIGURE 21.9 Setting a depth for a Section Vi ...
Part V: Creating Drawings FIGURE 21.10 A Partial Section View requiring only a single sketched line Sketched line You can use an ...
Chapter 21: Working with Drawing Views FIGURE 21.12 The Aligned Section View Editing a Section View Section Views are edited in ...
Part V: Creating Drawings FIGURE 21.13 A sketch loop and a Crop View To edit a Crop View, right-click the view, expand the arrow ...
Chapter 21: Working with Drawing Views FIGURE 21.14 A Broken-out Section View If the view has no pre-drawn, pre-selected loop, t ...
Part V: Creating Drawings FIGURE 21.15 Using the Section Scope In situations when you want to cut to the center of a particular ...
Chapter 21: Working with Drawing Views FIGURE 21.16 Setting the depth of the Broken-out Section View FIGURE 21.17 Editing the Br ...
Part V: Creating Drawings FIGURE 21.18 Dimensions on a Break View The PropertyManager in Figure 21.18 shows a bit of a discrepan ...
Chapter 21: Working with Drawing Views The Broken View PropertyManager also enables you to set the gap size and the style of the ...
Part V: Creating Drawings FIGURE 21.20 Two Auxiliary Views FIGURE 21.21 The Alternate Position View To create an Alternate Posit ...
Chapter 21: Working with Drawing Views Tip The best way to create this view is to either create two configurations used exclusiv ...
Part V: Creating Drawings The Relative View has a special function that is important for drawings of multi-body parts. If both f ...
Chapter 21: Working with Drawing Views FIGURE 21.23 3D Drawing View Mode View orientation and alignment Although you may have se ...
Part V: Creating Drawings Another option for view alignment is to align it relative to another view; this involves stacking one ...
Chapter 21: Working with Drawing Views FIGURE 21.25 The View PropertyManager The more standard 2D drawing display modes are Wire ...
Part V: Creating Drawings FIGURE 21.26 The Component Line Font dialog box Layers Yes, SolidWorks drawings can use layers. You ca ...
«
33
34
35
36
37
38
39
40
41
42
»
Free download pdf