Part I: SolidWorks Basics
Cross-Reference
The Fillet Xpert, which helps you to manage large numbers of overlapping fillets by automatically sorting
through feature order issues, is discussed in detail in Chapter 27. n
FIGURE 4.14
Selecting an edge through model faces- Select the four edges that are indicated for fillets in Figure 4.15. Apply .050-inch-
radius fillets. - Apply a last set of .050-inch chamfers to the backside of the counterbores and slot.
The finished part is simple, but you have learned many useful techniques along the way. In the rest
of this chapter, you will put the part together with other parts to form an assembly and then create
a quick 2D drawing of the part and the assembly to document the design.