Chapter 7: Selecting Features
Scribe ............................................................................................................
Scribe is the simplest of the options to explain, and understanding it can help you understand the
other options. Scribe creates a split line-like edge on the face.Several requirements must be met in order to make a wrap feature work:l The face must be a cylindrical or conical face.l (^) The loop must be a closed loop or nested closed loop 2D sketch.
l The sketch must be on a plane that is either tangent to or parallel to another plane that is
tangent to the face.
l Wrap supports multiple closed loops within a single feature.
l (^) Wrap supports wrapping onto multiple faces.
l The wrap should not be self-intersecting when it wraps around the part. (Self-intersection
will not cause the feature to fail, but on the other types, Emboss and Deboss, it may pro-
duce unexpected results.)
Scribes can be created on solid or surface faces. Scribed surfaces are frequently thickened to create
a boss or a cut.
Emboss ..........................................................................................................
The Wrap Emboss option works much like the scribe, but it adds material inside the closed loop
sketch, at the thickness that you specify in the Emboss PropertyManager. Embossing can only be
done on solid geometry. If the feature self-intersects, then the intersecting area is simply not
embossed, and is left at the level of the original face. One result is that creating a full wrap-around
feature, such as the geometry for a barrel cam, requires a secondary feature. This is because the
Wrap feature always leaves a gap, regardless of whether the sketch to be wrapped is under or over
the diameter-multiplied-by-pi length.Tip
To work around this problem, you can use a loft, extrude, or revolve feature to span the gap.n
When you use the Emboss option, you can set up the direction of pull and assign draft so that the
feature can be injection molded. This limits the size of the emboss so that it must not wrap more
than 180 degrees around the part.Deboss
Deboss is just like emboss, except that it removes material instead of adding it. Figure 7.58 dem-
onstrates all these options. The part shown in the images is available on the CD-ROM with the file-
name Chapter 7 Wrap.sldprt. For each of the demonstrated cases, the original flat sketch is
shown to give you some idea of how the sketch relates to the finished geometry.