Part V: Creating Drawings
FIGURE 23.19
The drawing after dimensions have been deleted and moved
- Select the.188 diameter dimension, and in the Dimension Text box, type TYP after
the text, and add a bilateral tolerance of +.003, –.005. Save this as a style by
clicking the Add Style icon.
- Apply the newly created dimension style to the R.100 dimension. The results up to
this step are shown in Figure 23.20.
FIGURE 23.20
Dimensions and tolerances after Step 11
- Make one of the dimension leaders for either the.188 or the R.100 dimensions cross
the extension lines of the 4.500 dimension. Then select the 4.500 dimension and in its
PropertyManager, select the Use Document Gap option in the Break Lines panel, on the
Leaders tab.
- Place a B datum marker on the circumference of the smaller arc on the left end of
the part. Create a Geometric Tolerance control frame, as shown in Figure 23.21.