Handbook for Sound Engineers
232 Chapter 9 sentation of the sound field at any specified receiver location by using the results of the acoustical modeling ph ...
Acoustical Modeling and Auralization 233 composite data for a wide segment of the test results. Another issue of concern when us ...
234 Chapter 9 that follows the statistical behavior of sound in a bounded space. The technique yields a parametric room impulse ...
Acoustical Modeling and Auralization 235 ing of the physical parameters that define the space. A diagram of the modeling and aur ...
236 Chapter 9 References Makrinenko, Leonid I. “Acoustics of Auditoriums in Public Buildings.” First Publication: 1986 (Russian ...
Acoustical Modeling and Auralization 237 Wightman, F. L., and Kistler, D. J. “Headphone Simulation of Free-Field Listening. II: ...
This page intentionally left blank ...
Part 2 Electronic Components ...
This page intentionally left blank ...
241 Chapter 10 Resistors, Capacitors, and Inductors by Glen Ballou 10.1 Resistors............................................... ...
242 10.3.3 Ferrite Beads........................................................................ 268 10.3.4 Skin Effect......... ...
Resistors, Capacitors, and Inductors 243 10.1 Resistors Resistance is associated with the phenomenon of energy dissipation. In i ...
244 Chapter 10 curves that gives a zero temperature coefficient at some temperature. Metal film and wirewound types have tempera ...
Resistors, Capacitors, and Inductors 245 thermal destruction of the resistor and surrounding components. Power Coefficient. The ...
246 Chapter 10 Forced Air Cooling. Resistors and components can be operated at higher than rated wattage with forced air cooling ...
Resistors, Capacitors, and Inductors 247 Resistors in Parallel. The total resistance of resistors in parallel is (10-7) If two r ...
248 Chapter 10 Wirewound Resistors. Wirewound resistors have resistive wire wound on a central ceramic core. One of the oldest t ...
Resistors, Capacitors, and Inductors 249 Photocells are rated by specifying their resistance at low and high light levels. These ...
250 Chapter 10 inaccurate readings, therefore the current through the unit should be kept to 1 mA or less. Self heating can also ...
Resistors, Capacitors, and Inductors 251 noticeable when trying to adjust a bias voltage with an old oxidized pot. Sometimes the ...
«
9
10
11
12
13
14
15
16
17
18
»
Free download pdf