i. Plan – scale 1:50
ii. Elevation- scale 1:50
iii. Section – scale 1:50
iv. Detail – scale 1:20 or 1:10
v. Site plan- scale 1:200
vi. Enlarged views of important details
vii. Reference tables, legends showing area covered,
sizes of doors and windows etci. Plan: The single line plan is developed in to a double line
or solid plan. Length and width of rooms are shown in the
plan. Plan is drawn by assuming the structure to be cut at
a height of 1.5m from the ground level. Thickness of
walls, width of doors, windows, sunshades, steps etc. are
shown in the plan. The parts of the structure above the
cutting plane are shown by dotted lines. Plinth projection
is also shown in the plan.
ii. Elevation: It shows the width and height of a structure.
Front and side views are drawn to give frontal and side
look of the structures. The shapes of windows, doors,
verandah openings, sunshades and parapets are shown
in true look.
iii. Section: the structure is supposed so be cut by a vertical
plane, and the view of the cut-section is drawn, which is
termed as a section. It shows height of rooms and depth
of foundations, type of roofs, floors, thickness of walls and