Handbook of Civil Engineering Calculations

Contents xiii

• Analysis of Stress and Strain 1.
  
  
  • Stress Caused by an Axial Load 1.
  
  
  • Deformation Caused by an Axial Load 1.
  
  
  • Deformation of a Built-Up Member 1.
  
  
  • Reactions at Elastic Supports 1.
    
    
    • Load 1. Analysis of Cable Supporting a Concentrated
    
    
    
    
  
  
  • Displacement of Truss Joint 1.
  
  
  • Axial Stress Caused by Impact Load 1.
  
  
  • Stresses on an Oblique Plane 1.
  
  
  • Evaluation of Principal Stresses 1.
    
    
    • Pressure 1. Hoop Stress in Thin-Walled Cylinder under
    
    
    
    
  
  
  • Stresses in Prestressed Cylinder 1.
  
  
  • Hoop Stress in Thick-Walled Cylinder 1.
    
    
    • Member 1. Thermal Stress Resulting from Heating a
    
    
    • Elements in Parallel 1. Thermal Effects in Composite Member Having
    
    
    • Elements in Series 1. Thermal Effects in Composite Member Having
    
    
    
    
  
  
  • Shrink-Fit Stress and Radial Pressure 1.
  
  
  • Torsion of a Cylindrical Shaft 1.
  
  
  • Analysis of a Compound Shaft 1.
  
  
  
  


• Stresses in Flexural Members 1.
  
  
  • Shear and Bending Moment in a Beam 1.
  
  
  • Beam Bending Stresses 1.
  
  
  • Analysis of a Beam on Movable Supports 1.
  
  
  • Flexural Capacity of a Compound Beam 1.
  
  
  • Analysis of a Composite Beam 1.
  
  
  • Beam Shear Flow and Shearing Stress 1.
  
  
  • Locating the Shear Center of a Section 1.
    
    
    • Composite Columns 1. Determining Design Compressive Strength of
    
    
    
    
  
  
  • Analyzing a Concrete Slab for Composite Action 1.
    
    
    • Beam Web 1. Determining the Design Shear Strength of a
    
    
    • End Reaction 1. Determining a Bearing Plate for a Beam and Its
    
    
    • Plate 1. Determining Beam Length to Eliminate Bearing
    
    
    • Analysis 1. Part 3. Hangers and Connections, Wind-Shear
    
    
    
    
  
  
  
  


• Design of an Eyebar 1.


• Analysis of a Steel Hanger 1.


• Analysis of a Gusset Plate 1.


• Design of a Semirigid Connection 1.


• Riveted Moment Connection 1.


• Design of a Welded Flexible Beam Connection 1.


• Design of a Welded Seated Beam Connection 1.


• Design of a Welded Moment Connection 1.


• Rectangular Knee of Rigid Bent 1.


• Curved Knee of Rigid Bent 1.


• Base Plate for Steel Column Carrying Axial Load 1.


• Base for Steel Column with End Moment 1.


• Grillage Support for Column 1.


• Wind-Stress Analysis by Portal Method 1.


• Wind-Stress Analysis by Cantilever Method 1.


• Wind-Stress Analysis by Slope-Deflection Method 1.


• Wind Drift of a Building 1.


• Reduction in Wind Drift by Using Diagonal Bracing 1.


• Light-Gage Steel Beam with Unstiffened Flange 1.