Autodesk Revit Architecture 2014 Fundamentals - SDC Publications

Basic Drawing and Editing Tools

© 2013, ASCENT - Center for Technical Knowledge® 2–21

3. In the Quick Access Toolbar, click (Save). When
   prompted, name the project Simple Building.rvt.


4. In the Architecture tab>Build panel, click (Wall).


5. In the Modify | Place Wall tab>Draw panel, click|

(Rectangle) and draw a rectangle approximately

100’ x 70’. You do not have to be precise because you can

change the dimensions later.

6. Note that the dimensions are temporary. Select the vertical
   dimension text and type 70’ 0", as shown in Figure 2–27.
   Press .

Figure 2–27

7. The dimensions are still displayed as temporary. Click the
   dimension controls of both the dimensions to make them
   permanent, as shown in Figure 2–28.

Figure 2–28

 You will change the horizontal wall dimension using the

permanent dimension.

8. In the Select panel, click (Modify).