Autodesk Revit Architecture 2014 Fundamentals - SDC Publications

Autodesk Revit Architecture 2014 Fundamentals

2–22 © 2013, ASCENT - Center for Technical Knowledge®

9. Select either vertical wall. The horizontal dimension becomes
   active (changes to blue). Click the dimension text and type
   100’ 0", as shown in Figure 2–29.

Figure 2–29

10. Click in an empty space to end the selection. You are still in
    the Modify command.


11. In the Architecture tab>Build panel, click (Wall). In the

Draw panel, verify that (Line) is selected. Draw a wall

horizontally from midpoint to midpoint of the vertical walls.

12. Draw another horizontal wall 8’-0" above the middle
    horizontal wall. You can use temporary dimensions or the
    Offset field to do this.


13. Draw a vertical wall exactly 16’-0" from the left wall, as
    shown in Figure 2–30.

Figure 2–30