Autodesk Revit Architecture 2014 Fundamentals - SDC Publications

Autodesk Revit Architecture 2014 Fundamentals

2–36 © 2013, ASCENT - Center for Technical Knowledge®

11. Continue copying until you place the fifth wall, as shown in
    Figure 2–53.

Figure 2–53

12. Press twice to finish the command.


13. Zoom in on the room to the far right.


14. Select the door and door tag 5 in the room left to it.


15. In the Modify panel, click (Mirror - Pick Axis).


16. Select the vertical wall between the rooms as the mirror axis
    and place the new door, as shown in Figure 2–54.

Figure 2–54

17. Click in empty space to release the selection set.

Task 2 - Draw and array cubicles.

1. Pan to the lower left corner of the building.


2. In the Architecture tab>Build panel, click (Wall).

Mirror axis