Architectural and Engineering Design Standards

(avery) #1

Rev. 13 November 1, 2016


Page | 38


  1. Carpet to be 100% solution dyed nylon. 6’ wide Tandus Powerbond or approved equivalent.


09 72 50 Epoxy Quartz Flooring


  1. Flooring and Base: Aggregate of coated quartz, embedded in clear epoxy and applied to a total thickness of 1/16"
    to 1/8", as recommended by the manufacturer. Apply two (2) coats of manufacturer’s sealer topcoat to reduce
    texture. Verify texture with users after initial topcoat application.


09 90 00 Painting and Coa ting


  1. Metal Doors and Frames
    a) 1 Coat S-W Pro Industrial Pro-Cryl, B66-310 Series.
    i. Alternate: Interior and Exterior; Ferrous and Non Ferrous Metals (very smooth and/or Kynar like
    surfaces).
    ii. Bonding Primer: 1 Coat S-W DTM Bonding Primer, B66A50.
    b) Finish: 1-2 Coats S-W Pro Industrial Acrylic, B66-600 Series available in Gloss, Semi-Gloss, and Egg-Shell.
    c) Doors and frames to be painted the same color on both sides.

  2. Wood Doors
    a) New wood doors shall be prepped and stained or painted offsite.
    b) When painting over existing wood lacquered doors, doors shall be removed and prepared offsite. The
    following shall also be specified:
    iii. Prior to painting, doors shall be power sanded smooth to remove the existing stain.
    iv. Primer shall be one coat of XIM Advanced Technology UMA brand Bonder.
    v. Finish: 1-2 Coats S-W Pro Industrial Acrylic, B66-600 Series available in Gloss, Semi-Gloss, and
    Egg- Shell.

  3. Fire and Smoke Wall Markings
    a) Provide permanent marking of all fire (1 hour, 2 hour, etc.) and smoke rated partitions.
    b) Marking shall be an 8 inch diameter fluorescent orange painted circle applied 6-12 inches above the finished
    ceiling with a 4 inch black numeral or letters stenciled over the orange circle.
    c) The markings shall be on both sides of all rated partitions and in every adjacent room.
    d) The spacing shall not be over 8 feet on center.


09 96 56 Epoxy Paint


  1. Epoxy paint shall be specified for operating and procedure rooms where surfaces need to be scrubbable.

  2. Sherwin Williams “Pro Industrial – Zero VOC Waterborn Catalyzed Epoxy - #B73-360 Series Eg-Shel.”

Free download pdf