RX8--Transmission (Manual & Auto)

Yes

Replace the TCM, then go to the next step.

(See TCM REMOVAL/INSTALLATION .)

10

VERIFY TROUBLESHOOTING OF DTC P0708

COMPLETED

• Make sure to reconnect all disconnected
  connectors.


• Clear the DTC from the TCM memory using
  the WDS or equivalent.


• Drive the vehicle in M range, and change
  gears by operating the steering shift switch.


• Is the same DTC present?

No Go to the next step.

Yes

Go to the applicable DTC inspection.

(See DTC TABLE .)

11

VERIFY AFTER REPAIR PROCEDURE

• Perform the "After Repair Procedure".

(See AFTER REPAIR PROCEDURE .)

• Are any DTCs present?

No DTC troubleshooting completed.

(w) RX-8 Transmission (Manual & Auto)