RX8--Transmission (Manual & Auto)

• Make sure to reconnect all disconnected
  connectors.


• Clear DTC using the WDS or
  equivalent.


• Start the engine.


• Warm up AT.


• Drive the vehicle under the following
  conditions at least 3 times for 1 s or
  more.
  
  ATF temperature: 20 °°°°C {68 °°°°F}
  or more
  
  Drive in D range, 3GR
  
  Throttle opening angle (TOHP
  PID): 12.5% or more
  
  Vehicle speed (VSS PID): 20
  km/h {12 mph} or more


• Is the same DTC present?

No Go to the next step.

Yes

Go to the applicable DTC inspection.

(See DTC TABLE .)

11

VERIFY AFTER REPAIR PROCEDURE

• Perform the "After Repair Procedure".

(See AFTER REPAIR PROCEDURE .)

• Are any DTCs present?

No DTC troubleshooting completed.

(w) RX-8 Transmission (Manual & Auto)