RX8--Transmission (Manual & Auto)

• Make sure to reconnect all disconnected
  connectors.


• Clear the DTC from the TCM memory
  using the WDS or equivalent.


• Start the engine.


• Warm up AT.


• Drive the vehicle under the following
  conditions for 10 s or more.
  
  Vehicle speed (VSS PID):
  Within 1087 km/h {6 54
  mph}
  
  Gear position: 4GR
  
  TR switch position: D range
  
  TCC solenoid valve: ON


• Is the same DTC present?

No Go to the next step.

Yes

Go to the applicable DTC inspection.

(See DTC TABLE .)

10

VERIFY AFTER REPAIR PROCEDURE

• Perform the "After Repair Procedure".

(See AFTER REPAIR PROCEDURE .)

• Are any DTCs present?

No DTC troubleshooting completed.

(w) RX-8 Transmission (Manual & Auto)