DTC P0767
DTC P0767 Shift solenoid C malfunction (stuck on)
DETECTION
CONDITION
- Large difference between actual gear ratio and gear ratio set in TCM.
Diagnostic support note:- This is continuous monitor (CCM).
- MIL illuminates if TCM detects the above malfunction conditions in two
consecutive drive cycles. - PENDING CODE is available.
- FREEZE FRAME DATA is available.
- AT warning light does not illuminate.
- DTC is stored in TCM memory.
POSSIBLE CAUSE
- Shift solenoid C malfunction
- Shift valve C stuck
- TCM malfunction
(w) RX-8 Transmission (Manual & Auto)