Wave pattern Malfunction cause
No wave pattern (fixed
at HI)
- Open circuit between turbine sensor terminal (A)TCM
terminal 2G - Open/Short circuit between turbine sensor terminal
(B)battery
No wave pattern (fixed
at LO)
- Short circuit between turbine sensor terminal (A)TCM
terminal 2G
Wave pattern HI is too
low
- Harness malfunction between turbine sensor terminal
(A)TCM terminal 2G - Insufficient output from the turbine sensor
Wave pattern LO is too
high
- Poor connection (loose GND) between turbine sensor terminal
(C)TCM terminal 2G
Wave pattern too
wide/narrow
- Metal shavings (foreign material) on turbine sensor
- Reverse and high clutch drum rotation fluctuation
- Connected terminals: 2G (+) and 2M (−)
(w) RX-8 Transmission (Manual & Auto)