Hardware Manual

Hardware Manual PCD 1 / PCD 2 Series│Document 26 / 737│Edition EN 15│2008-07-22

Saia-Burgess Controls AG

PCD2.G400

Input/output (I/O) modules

5

5.6.1 PCD2.G400, multi-functional input/output modulePCD2.G400, multi-functional input/output module

Application

Combined module with digital and analogue inputs and outputs. This module is

designed to extend the range of uses for the PCD. The functions and the technical

specification are based on the existing PCD2 modules.

This module cannot be installed in the PCD1.

The technical details should be taken from the descriptions of these modules.

Number and type of inputs/outputs

10 digital inputs, E0 ... E9 (addresses 0 ... 9)

Technical data as for PCD2.E110, but without the option of sink operation,

i.e. no “L” connection.

6 analogue outputs, A16 ... A21 (base address 16, channels 0 ... 5)

0 ... 10 VDC / 8 bit; remaining tech. data as for PCD2.W400.

8 digital outputs, A32 ... A39 (addresses 32 ... 39)

24 VDC / 0.5 A; remaining tech. data as for PCD2.A400.

2 analogue inputs, E48 and E49 (base address 48, channels 0 ... 1)

0 ... 10 VDC / 10 bit; remaining tech. data as for PCD2.W200.

6 analogue inputs, E50 ... E55 (base address 48, channels 2 ... 7)

Pt/Ni 1000 / 10 bit with data as for PCD2.W220.

Internal current consumption from +5 V bus: 10 ... 65 mA

V+ bus: 35 mA

LEDs and connection terminals

E 00 E 11 E 22 E 33 E 44 E 55 E 66 E 77 - 8 - --- 9 - -- E 08 E 19 - 2 - --A 316 A 417 A 518 A 619 A 720 A 821 - - 9 - - A 032 A 133 A 234 A 335 A 436 A 537 A 638 A 739 8 +-- 9 - - E 048 E 149 E 250 E 351 E 452 E 553 E 654 E 755 - - 8 - -- 9 - --

E (^110) W 400 A 400 W 200 / W 220
The module can be installed on sockets 1 ... 4 (top) on the PCD2.