Hardware Manual PCD 1 / PCD 2 Series│Document 26 / 737│Edition EN 15│2008-07-22

Saia-Burgess Controls AG

PCD2.H32x

Input/output (I/O) modules

5

Block diagram

For further information, please refer to manual 26/772, “PCD2.H32x - motion control

modules for servo-drives”

Watchdog: This module cannot be used on the base address 240 (or 496 for the

PCD2.M17x), because it would interact with the watchdog, and would cause a

malfunction.

For details, please refer to the “Watchdog” section, which describes the correct use of

the watchdog in conjunction with PCD2 components.

i