Hardware Manual PCD 1 / PCD 2 Series│Document 26 / 737│Edition EN 15│2008-07-
Hardware Manual PCD 1 / PCD 2 Series│Document 26 / 737│Edition EN 15│2008-07-
Hardware Manual PCD 1 / PCD 2 Series│Document 26 / 737│Edition EN 15│2008-07-
Hardware Manual PCD 1 / PCD 2 Series│Document 26 / 737│Edition EN 15│2008-07-
Hardware Manual PCD 1 / PCD 2 Series│Document 26 / 737│Edition EN 15│2008-07-
Saia-Burgess Controls AG
Contents
0
0.1 Document historyDocument history
Published Version Changed Remarks
24.12.2004 E11a Whole Doc.
Chapt. 4.8.
Page 57- translation from D
- error in Profibus: 4.8.1 new
- error in formulas: Page 57
01.02.2005 E12 Chapt. 0
Chapt. 1
Chapt. 3 - error in index (Acrobat)
- error in graphical index M
- watch-Dog IL-Example.: new
11.10.2005 E13 Chapt. 5 - corrected error in pin allocation PCD2.A
2007-07-25 E14 Chapt. 3
Chapt. 4
Chapt. 5Chapt. A- inserted new controllers PCD1.M1x
- added communications modules PCD7.F
and PCD2.T - new order for the I/O-modules, according to
the price list - maximal current of the I/O-modules instead
of typical current. - added new I/O-Modules PCD2.E112, PCD2.
E116, PCD2.E613, PCD2.E - PCD2.A465 pinout corrected
- new TIP by PCD2.W2x0, wrong polarity on
input - description of the Jumper positions for
PCD2.K - calculation of the spark deletion in the ap-
pendix
2008-07-22 E15 Chapt. 5 - Added new module PCD2.W
0.2 Trademarks
Saia® and Saia® PCD are registered trademarks of Saia-Burgess Controls AG.
STEP7® ,SIMATIC®, S7-300®, S7-400®, and Siemens® are registered trademarks of
Siemens AG.Technical changes are subject to the state of technology.Saia-Burgess Controls AG, 2003. © All rights reserved.Published in Switzerland