Engineering Design with SOLIDWORKS® 2016 Fundamentals of Drawing
Company Logo
A Company logo is normally located in the Title
block of the drawing. You can create your own
Company logo or copy and paste an existing
picture.
The COMPASS.jpeg file is located in the
LOGO folder. Copy all files from the LOGO
folder to your hard drive. Insert the provided
Company logo in the Edit Sheet Format mode.
If you have your own Logo, skip the process
of copying and applying the LOGO folder and file found below.
Activity: Company LogoInsert a Company Logo.
92) Copy the ENGDESIGN-W-SOLIDWORKS\LOGO folder to
your hard drive. If you have your own Logo, skip the following
process of copying and applying the LOGO folder and file.
Right-click Edit Sheet Format in the Graphics window.
Click Insert, Picture from the Menu bar. The Open dialog box
is displayed.
Double-click the Logo.jpg file. The Sketch Picture
PropertyManager is displayed.
Drag the picture handles to size the picture to the left side
of the Title block. Note: Text was added to the picture.
Un-check the Enable scale tool box and the Lock aspect
ratio box.
Click OK from the Sketch Picture
PropertyManager.
Text can be added to create a
custom logo. You can insert a picture or
an object.
View the provided videos on
Drawing Fundamentals to enhance your
experience in this chapter.