Engineering Design with SOLIDWORKS 2016

Fundamentals of Drawing Engineering Design with SOLIDWORKS® 2016

GUIDE Part-Modify

A drawing contains part views, geometric dimensioning and tolerances, centerlines,

center marks, notes, custom properties and other related information. Perform the
following tasks before starting the GUIDE drawing:

• Verify the part. The drawing requires the associated part.


• View dimensions in each part. Step through each feature of the part and review all
  dimensions.


• Review the dimension scheme to determine the required dimensions and notes to

manufacture the part.

Activity: GUIDE Part-Modify

Open the GUIDE part.

117. 
     

     Click Open from the Menu bar.

     
     


118. 
     

     Select the folder that the GUIDE document is in.

     
     

Modify the dimensions.
119) Select the Filer Parts (prt; sldprt) button.

120. 
     

     Double-click GUIDE.

     
     


121. 
     

     Click Hidden Lines Visible from the Heads-up View
     toolbar.

     
     


122. 
     

     Double-click Base-Extrude from the GUIDE
     FeatureManager.

     
     


123. 
     

     Click the 80 dimension.

     
     


124. 
     

     Enter 100 mm.

     
     


125. 
     

     Click inside the Graphics window.

     
     

Display a Shaded With Edges view. Save the GUIDE part.

126. 
     

     Click Shaded With Edges from the Heads-up View
     toolbar.

     
     


127. 
     

     Click Save.

     
     

Review part history with the Rollback bar to understand how the part was created.

Position the Rollback bar at the top of the FeatureManager. Drag the Rollback bar below