Engineering Design with SOLIDWORKS 2016

Fundamentals of Drawing Engineering Design with SOLIDWORKS® 2016

The holes in the Auxiliary view require a

diameter dimension and a note to represent
the six holes. Use the Hole Callout to

dimension the holes. The Hole Callout

function creates additional notes required to

dimension the holes.

The dimension standard symbols are displayed automatically
when you use the Hole Wizard feature.

Activity: Dimension Holes and the Hole Callout

Dimension the Linear Pattern of Holes.
241) Click the Annotation tab from the CommandManager.

242. 
     

     Click the Hole Callout t ool. The Hole Callout tool
     inserts information from the Hole Wizard.

     
     


243. 
     

     Click the circumference of the lower left circle in the
     Auxiliary view as illustrated. The tool tip M3x0.5 Tapped
     Hole1 of GUIDE is displayed.

     
     


244. 
     

     Click a position to the bottom left of the Auxiliary
     view.

     
     

The Hole Callout text displayed in the

Dimension Text box depends on the options
utilized in the Hole Wizard feature and the Linear

Pattern feature.

Remove trailing zeroes for ASME Y14 millimeter display.
245) Select .1 from the Primary Unit
Tolerance/Precision box.

246. Click OK from the Dimension
     PropertyManager. The Hole Callout is
     deactivated.

Display the Hole Wizard Callout information
automatically by selecting the Hole callout button

in the Model Items PropertyManager.