Untitled

To remove a command

1 Click Manage tab ➤ Customization panel ➤ User Interface.

2 In the Customize User Interface Editor, Customize tab, Command List

pane, select Custom from the Command Filter drop-down list.

The list is filtered to only show the commands that you have created in

the loaded customization files.

3 Select the command to be removed, and right-click over the command.

4 Click Remove.

NOTEA command only can be removed when it is not being referenced by

a user interface element, such as a toolbar or menu.

WARNINGThere is no way to undo the removal of a command or user

interface element from inside the Customize User Interface (CUI) Editor, so

be careful when removing commands and user interface elements. If you

accidentally remove the wrong command or user interface element the best

thing to do is click Cancel, but this will also undo any other changes that you

might have made. If you already made several changes to the CUIx file and

do not want to lose the changes that you already made, you can open the

backup CUIx file that is automatically created after a change is made to a

CUIx file from the Transfer tab and then proceed to recover the command

or user interface element that was accidentally removed.

96 | Chapter 4 User Interface Customization