Rekrences 395Hoek E., Wood D. and Shah S. (1992) Modified Hoek-Brown failure criterion for
jointed rock masses. Proc. ISM Symposium: Eurock '92, Chester. Thomas Telford,
London, pp. 209-214.
Hood M., Nordland R. and Thimons E. (1990) A study of rock erosion using high
pressure water jets. Int. J. Rock Mech. Min. Sci. C. Geomech. Abstr., 27,7746.
Hudson J. A. (1989) Rock Mechanics Principles in Engineering Practice. CIRIA/
Butterworths, London, 72pp.
Hudson, J. A. (1992) Rock Engineering Systems: Theory and Practice. Ellis Honvood,
Chichester, 185pp.
Hudson J. A. (ed.) (1993) Comprehensive Rock Engineering. Pergamon Press, Oxford,
4407pp.
Hudson J. A. and Cooling C. M. (1988) In situ rock stresses and their measurement
in the U.K.-Part 1: The current state of knowledge. Int. J. RockMech. Min. Sci. 8
Geomech. Abstr. 25,363-370.
Hudson J. A., Crouch S. L. and Fairhurst C. (1972) Soft, stiff and servo-controlled
testing machines: a review with reference to rock failure. Engineering Geology 6,
15.5189.
Hudson J. A. and Jiao Y. (1996) Analysis of Rock Engineering Projects. Imperial
College Press, London, 320pp (in press).
Hudson J. A., McCaul C. and Priest S. D. (1977) A high load tunnel jacking test.
Ground Engineering May, 22-26.
Hyett A. J. (1990) The potential state of stress in a naturally fractured rock mass, Ph.D.
Thesis, Imperial College, University of London, 365pp.
Hyett A. J., Dyke C. G. and Hudson J. A. (1986) A critical examination of basic con-
cepts associated with the existence and measurement if in situ stress, in Proc. of
the Int. Synzp. on Rock Stress and Rock Stress Measurements, Stockholm (0. Stephans-
son, ed.) pp. 387-396.
Ikegawa (1992) Three-dimensional geometrical analysis of rock mass structure,
Ph.D. Thesis, Imperial College, London, 413pp.
Isherwood D. (1979) Geoscience Data Base Handbook for Modelling a Nuclear Waste
Repository, Vol. 1. NUREG/CR-O912 V1. UCRL-52719. V1.
Jaeger J. C. and Cook N. G. W. (1979) Fundamentals of Rock Mechanics. Chapman &
Hall, London, 593pp.
Janbu N. (1954) Application of composite slip circles for stability analysis. Proceed-
ings ofthe European Conference on Stability of Earth Slopes, Stockholm, Vol. 3, pp. 43-49.
Jiao Yong (1995) Formalizing the systems approach to rock engineering, Ph.D.
Thesis, Imperial College, London.
Kim K. and Franklin J. A. (1987) Suggested methods for rock stress determination.
Int. J. Rock Mech. Min. Sci. 8 Geomech. Abstr. X,1, S74.
Kimmance J. P. (1988) Computer aided risk analysis of open pit mine slopes in
kaolin mineral deposits. Ph.D. Thesis, Imperial College, London, 393pp.
Kolsky H. (1963) Stress Waves in Solids. Dover, New York, 213pp.
La Pointe P. R. and Hudson J. A. (1985) Characterization and interpretation of rock
mass jointing patterns. Special Paper 199 of the Geological Society of America (pre-
sented as a University of Wisconsin-Madison, Engineering Experiment Research
Station Report, June 1981).
Langefors U. and Kihlstrom B. (1963) Rock Blasting. John Wiley, London, 403pp.
Long J. C. S. (1983) Investigation of equivalent porous medium permeability in net-
works of discontinuous fractures, Ph.D. Dissertation, University of California,
Berkeley, CA, 277pp.
Lorig L. J. and Brady B. G. H. A hybrid computational scheme for excavation and
support design in jointed rock, in (1984) Design and Performance of Underground
Excuvations (Brown E. T. and Hudson J, A., eds). British Geotechnical Society,
London, pp. 105-112.
Loureiro-Pinto J. (1986) Suggested method for deformability determination using a
large flat jack technique. lnt. 1. Rock Mech. Min. Sci. & Geomech. Abstr. 23,2,131-140.