J.L. Becker,
a Gasbarre Furnace Group CompanyJ
.L. Becker, a Gasbarre Furnace Group Company, designs,
manufactures and services a full line of heat-treating
equipment for virtually any process, including annealing,
quenching, hardening, carburizing and tempering. These systems
include batch and continuous-type operations, specializing in
integral-quench (IQ ), tip-up, box and car-bottom furnaces. J.L.
Becker has been providing excellence in design, construction and
support for over 40 years. We custom-engineer your thermal-
processing equipment to satisfy your requirements and offer a
full line of replacement parts and auxiliary equipment, such as
atmosphere generators, quench tanks and charge cars.CORPORATE PROFILE ADVERTORIAL
IndustrialHeating.com ■ MAY 2015 57Graphite Metallizing Corp.
G
APHALLOY®, a graphite/metal alloy, is ideally
suited for applications where temperatures are too
high to permit the use of oil or other lubricants.
GRAPHALLOY bearings and bushings will not soften at high
temperatures or extrude under load.
Many grades are suitable for temperatures up to 750°F
(400°C) in air. In addition, special grades provide service up to
1000°F (535°C) and higher in non-oxidizing atmospheres. Use
GRAPHALLOY
in industrial
ovens, glass
plants, conveyors,
dryers, kilns,
stokers, soot
blowers, oil
guns, gypsum
board and veneer
dryers – wherever
temperatures
are too high to
permit the use of
oil or greases.CORPORATE PROFILE ADVERTORIAL
GRAPHALLOY
®BEARINGS CAN
TAKE THE HEAT.
GRAPHALLOY®bushings,
bearings and components:- Survive when others fail
- Run hot, cold, wet or dry
- Excel at -450°F to 1000°F
- Corrosion resistant
- Self-lubricating
- Non-galling
- Low maintenance
- Ovens, dryers, pumps, valves,
turbines, mixers, conveyors
GRAPHITE METALLIZING
CORPORATION
Yonkers, NY 10703 U.S.A.HANDLE HIGH TEMPERATURE AND HARSH
OPERATING CONDITIONS WITH EASEH06
TEL. 914.968.8400 • WWW.GRAPHALLOY.COM/IHISO 9001:2008