MY = .0000000E+00
MZ = 39.82639
SUMMATION POINT= .00000E+00 .00000E+00 .00000E+00The NFORCE command provides the force and moment summation for each selected node, in addition
to an overall summation.
Command(s):NFORCE
GUI: Main Menu> General Postproc> Nodal Calcs> Sum @ Each Node
Sample NFORCE Output
***** POST1 NODAL TOTAL FORCE SUMMATION *****
LOAD STEP= 3 SUBSTEP= 43
THE FOLLOWING X,Y,Z FORCES ARE IN GLOBAL COORDINATES
NODE FX FY FZ
1 -.4281E-01 .4212 .0000E+00
2 .3624E-03 .2349E-01 .0000E+00
3 .6695E-01 .2116 .0000E+00
4 .4522E-01 .3308E-01 .0000E+00
5 .2705E-01 .4722E-01 .0000E+00
6 .1458E-01 .2880E-01 .0000E+00
7 .5507E-02 .2660E-01 .0000E+00
8 -.2080E-02 .1055E-01 .0000E+00
9 -.5551E-03 -.7278E-02 .0000E+00
10 .4906E-03 -.9516E-02 .0000E+00
*** NOTE ***
Summations based on final geometry and will not agree with solution
reactions.
***** SUMMATION OF TOTAL FORCES AND MOMENTS IN GLOBAL COORDINATES *****
FX = .1147202
FY = .7857315
FZ = .0000000E+00
MX = .0000000E+00
MY = .0000000E+00
MZ = 39.82639
SUMMATION POINT= .00000E+00 .00000E+00 .00000E+00The SPOINT command defines the point (any point other than the origin) about which moments are
summed.
GUI:
Main Menu> General Postproc> Nodal Calcs> Summation Pt> At Node
Main Menu> General Postproc> Nodal Calcs> Summation Pt> At XYZ Loc7.2.4.3. Listing Element Table Data
To list specified data stored in the element table, use one of the following:
Command(s):PRETAB
GUI: Main Menu> General Postproc> Element Table> List Elem Table
Main Menu> General Postproc> List Results> Elem Table Data
To list the sum of each column in the element table, use the SSUM command (Main Menu> General
Postproc> Element Table> Sum of Each Item).
Release 15.0 - © SAS IP, Inc. All rights reserved. - Contains proprietary and confidential informationReviewing Results in POST1