Sample PRETAB and SSUM Output
***** POST1 ELEMENT TABLE LISTING *****
STAT CURRENT CURRENT CURRENT
ELEM SBYTI SBYBI MFORYI
1 .95478E-10 -.95478E-10 -2500.0
2 -3750.0 3750.0 -2500.0
3 -7500.0 7500.0 -2500.0
4 -11250. 11250. -2500.0
5 -15000. 15000. -2500.0
6 -18750. 18750. -2500.0
7 -22500. 22500. -2500.0
8 -26250. 26250. -2500.0
9 -30000. 30000. -2500.0
10 -33750. 33750. -2500.0
11 -37500. 37500. 2500.0
12 -33750. 33750. 2500.0
13 -30000. 30000. 2500.0
14 -26250. 26250. 2500.0
15 -22500. 22500. 2500.0
16 -18750. 18750. 2500.0
17 -15000. 15000. 2500.0
18 -11250. 11250. 2500.0
19 -7500.0 7500.0 2500.0
20 -3750.0 3750.0 2500.0
MINIMUM VALUES
ELEM 11 1 8
VALUE -37500. -.95478E-10 -2500.0
MAXIMUM VALUES
ELEM 1 11 11
VALUE .95478E-10 37500. 2500.0
SUM ALL THE ACTIVE ENTRIES IN THE ELEMENT TABLE
TABLE LABEL TOTAL
SBYTI -375000.
SBYBI 375000.
MFORYI .552063E-097.2.4.4. Other Listings.
You can list other types of results with the following commands:
The PRVECT command (Main Menu> General Postproc> List Results> Vector Data) lists the magnitude
and direction cosines of specified vector quantities for all selected elements.
The PRPATH command (Main Menu> General Postproc> List Results> Path Items) calculates and
then lists specified data along a predefined geometry path in the model. You must define the path and
map the data onto the path; see Mapping Results onto a Path (p. 170).
The PRSECT command (Main Menu> General Postproc> List Results> Linearized Strs) calculates
and then lists linearized stresses along a predefined path.
The PRERR command (Main Menu> General Postproc> List Results> Percent Error) lists the percent
error in energy norm for all selected elements.
The PRITER command (Main Menu> General Postproc> List Results> Iteration Summry) lists iteration
summary data.
The PRENERGY command lists the energies of the entire model or the energies of the specified com-
ponents.
Release 15.0 - © SAS IP, Inc. All rights reserved. - Contains proprietary and confidential informationThe General Postprocessor (POST1)