Engineering Mechanics

(Joyce) #1

(^164) „„„„„ A Textbook of Engineering Mechanics
9.5. RELATION BETWEEN EFFORT AND WEIGHT LIFTED BY A SCREW JACK
The screw jack is a device for lifting heavy loads, by applying a comparatively smaller effort
at its handle. The principle, on which a screw jack works, is similar to that of an inclined plane.
Fig. 9.20. Screw jack
Fig. 9.20 shows common form of a screw jack, which consists of a threaded rod A, called
screw rod or simply screw. The screw has square threads, on its outer surface, which fit into the inner
threads of the jack B. The load, to be raised or lowered, is placed on the head of the screw, which is
rotated by the application of an effort at the end of the lever for lifting or lowering the load.
If one complete turn of a screw thread, be imagined to be unwound, from the body of the
screw and developed, it will form an inclined plane as shown in Fig. 9.21
Let p = Pitch of the screw,
d = Mean diameter of the screw
r = Mean radius of the screw, and
α = Helix angle.
From the geometry of the figure, we find that
tan
2
pp
dr
α= =
ππ
...(where d = 2r)
Now let P = Effort applied at the mean radius of the screw jack to lift the load,
W = Weight of the body to be lifted, and
μ = Coefficient of friction, between the screw and nut.
Let φ = Angle of friction, such that μ = tan φ.
As a matter of fact, the principle, on which a screw jack works, is similar to that of an inclined
plane. Thus the force applied on the lever of a screw jack is considered to be horizontal. We have
already discussed in Art. 8.14 that the horizontal force required to lift a load on an inclined rough
plane
P = W tan (α + φ)
Example 9.8. A screw jack has mean diameter of 50 mm and pitch 10 mm. If the coefficient
of friction between its screw and nut is 0.15, find the effort required at the end of 700 mm long
handle to raise a load of 10 kN.
Fig. 9.21. Helix angle

Free download pdf