Lesson 11 – Detecting Interference, Editing and Exploding the Assembly and Creating Multiple
Assembly Configurations
Section IV – Modeling Assemblies 11.6 Multiple Assembly Configurations
Step 92: Right-click the Tire again and select Edit Assembly to save the changes and return to
the assembly.
Step 93: Repeat the previous step for the Wheel.
Change the color to black.
Step 94: Create a new configuration.
Click the ConfigurationManager tab.
Click Wheel_ Assembly and right-click to show the menu.
Click Add Configuration. Name the new configuration “Green” and click the check mark
to accept.
A new configuration named “Green” is created.
Step 95: Save the model.
Figure 11. 6 – Green Tire