Lesson 2 – Customizing SolidWorks
Section I – Preliminaries 2.5 Saving a Template
Step 9: Click FileSave As and
select Document Template on
the Save as type pull-down menu.
See Figure 2.6
Name the template
InchPart.prtdot and save
it for future use.
Step 10: To save your templates
on removable storage, you must
first tell SolidWorks the name of
your storage device.
Click ToolsOptions
System OptionsFile
Locations. See Figure 2.7.
In the drop down menu for
Show folders for: select
Document Templates.
In Folders you will
see the present
location of the
templates you see
in Figure 1.3a and
Figure 1.3b.
Click Add and
browse to your
removable storage
device.
Click OK and you
will see the new
location added.
Click OK again and
answer Yes to add
the new location.
Repeat Step 9 to
save one or more
templates in the new location.
Close your template document.
Open a new part and select the Advanced option. You will notice a new tab for your
new location. Note: the tab will not be visible if you did not save a template first.
Figure 2. 6 – Saving a Part Template
Figure 2. 7 – SolidWorks File Location