Lesson 6 – Editing Parts
Section II – Modeling Simple Parts 6.4 Editing the Spacer
Step 41: Right-click the Extruded Boss/Base feature in the
FeatureManager design tree to get the submenu in Figure 6.4. Then,
click the Edit Feature option to get the PropertyManager.
The top spacer is 0.56 inch thick and the bottom spacer is 0.38
inch thick. Change the length of the extrusion to the new size.Step 42: Save the BottomSpacer.
Step 43: Document your work.
Note: We edited the extrusion Feature to change the length of the
extrusion. If we wanted to change the diameter of the extrusion we would
edit the Sketch.
Figure 6. 4 – Editing the
TopSpacer