the bmw active hybrid 5 owners manual

(nextflipdebug2) #1
One wheel is yellow

A flat tire or major drop in inflation pressure in
the indicated tire.


All wheels are yellow

A flat tire or major drop in inflation pressure in
several tires.


Wheels, gray

The system cannot detect a flat tire. Reasons for
this may be:


▷ The system is being reset.


▷ Malfunction.


For Canadian models: Additional

information

The status display additionally shows the cur‐
rent tire inflation pressures and tire tempera‐
tures. The values shown are current measure‐
ment values and may vary depending on driving
style or weather conditions.


Carry out reset

Reset the system after each correction of the
tire inflation pressure and after every tire or
wheel change.



  1. "Vehicle Info"

  2. "Vehicle status"

  3. "Reset"

  4. Start the engine - do not drive away.

  5. Carry out the reset with "Reset".

  6. Drive away.


The tires are shown in gray and the status is dis‐
played.


After driving faster than 19 mph/30 km/h for a
short period, the tire inflation pressures set are
accepted as reference values. The reset is com‐
pleted automatically during driving. After suc‐
cessful completion of the reset, the tires appear
in green on the Control Display and "TPM
active" is displayed.


The trip can be interrupted at any time. If you
drive away again, the reset resumes automati‐
cally.

Low tire pressure message

The yellow warning lamp lights up. A
Check Control message is displayed.
▷ There is a flat tire or a major loss in
tire inflation pressure.
▷ A reset of the system was not carried out af‐
ter a wheel was changed. The system there‐
fore issues a warning based on the tire pres‐
sures before the last reset.


  1. Reduce your speed and stop cautiously.
    Avoid sudden braking and steering maneu‐
    vers.

  2. Check whether the vehicle is fitted with reg‐
    ular tires or run-flat tires.
    Run-flat tires, refer to page 181, are labeled
    with a circular symbol containing the letters
    RSC marked on the tire sidewall.
    Do not continue driving without run-flat
    tires
    Do not continue driving if the vehicle is not
    equipped with run-flat tires; continued driving
    may result in serious accidents.◀


When a low inflation pressure is indicated, DSC
Dynamic Stability Control is switched on if nec‐
essary.

Actions in the event of a flat tire

Normal tires


  1. Identify the damaged tire.
    Do this by checking the air pressure in all
    four tires.
    If the tire inflation pressure in all four tires is
    correct, it is possible that a reset was not
    carried out for the Tire Pressure Monitor. In
    that case, carry out a reset.


Safety Controls

103
Free download pdf