the bmw active hybrid 5 owners manual

(nextflipdebug2) #1
Run-flat tires

Maximum speed


You can continue driving with a damaged tire at
speeds up to 50 mph/80 km/h.


Continued driving with a flat tire


If continuing to drive with a damaged tire:



  1. Avoid sudden braking and steering maneu‐
    vers.

  2. Do not exceed a speed of 50 mph/80 km/h.

  3. Check the air pressure in all four tires at the
    next opportunity.
    If the tire inflation pressure in all four tires is
    correct, the Flat Tire Monitor may not have
    been initialized. In this case, initialize the
    system.


Possible driving distance with complete loss of
tire inflation pressure:


The possible driving distance after a loss of tire
inflation pressure depends on the cargo load
and the driving style and conditions.


For a vehicle containing an average load, the
possible driving distance is approx.
50 miles/80 km.


When the vehicle is driven with a damaged tire,
its handling characteristics change, e.g., re‐
duced lane stability during braking, a longer
braking distance, and altered self-steering
properties. Adjust your driving style accord‐
ingly. Avoid abrupt steering maneuvers or driv‐
ing over obstacles, e.g., curbs, potholes, etc.


Because the possible driving distance depends
on how the vehicle is used during the trip, the
actual distance may be smaller or greater de‐
pending on the driving speed, road conditions,
external temperature, cargo load, etc.


Continued driving with a flat tire
Drive moderately and do not exceed a
speed of 50 mph/80 km/h.


A loss of tire inflation pressure results in a
change in the handling characteristics, e.g., re‐
duced lane stability during braking, a longer
braking distance and altered self-steering prop‐
erties.◀

Final tire failure
Vibrations or loud noises while driving can
indicate the final failure of the tire. Reduce speed
and stop; otherwise, pieces of the tire could
come loose and cause an accident. Do not con‐
tinue driving, and contact your service center.◀

Collision warning


The concept

If the vehicle does not include Active Cruise
Control with Stop & Go, the collision warning is
controlled via the camera in the base of the in‐
terior rearview mirror.
The system issues a two-phase warning of a
danger of collision at speeds above approx.
10 mph/15 km/h. The time of these warnings
may vary depending on the current driving sit‐
uation.

In the process, vehicles in a similar direction of
movement are observed if they are located
within the detection range of the system.

When the vehicle is intentionally brought into
contact with a vehicle, the collision warning is
delayed to avoid misleading warnings.

Safety Controls

107
Free download pdf