the bmw active hybrid 5 owners manual

(nextflipdebug2) #1

Interior equipment


Vehicle equipment


All standard, country-specific and optional
equipment that is offered in the model series is
described in this chapter. Therefore, equipment
is also described that is not available in a vehicle,
e. g., because of the selected optional equip‐
ment or country variant. This also applies for
safety-related functions and systems.


Integrated universal remote


control


The concept

The integrated universal remote control can op‐
erate up to 3 functions of remote-controlled sys‐
tems such as garage door drives or lighting sys‐
tems. The integrated universal remote control
replaces up to 3 different hand-held transmit‐
ters. To operate the remote control, the buttons
on the interior rearview mirror must be program‐
med with the desired functions. The hand-held
transmitter for the particular system is required
in order to program the remote control.


During programming
During programming and before activat‐
ing a device using the integrated universal re‐
mote control, ensure that there are no people,
animals, or objects in the range of movement of
the remote-controlled device; otherwise, there
is a risk of injury or damage.


Also follow the safety instructions of the hand-
held transmitter.◀


Before selling the vehicle, delete the stored
functions for the sake of security.


Compatibility

If this symbol is printed on the packaging
or in the instructions of the system to be
controlled, the system is generally com‐

patible with the integrated universal remote
control.
If you have any questions, please contact:
▷ Your service center.
▷ http://www.homelink.com on the Internet.

HomeLink is a registered trademark of Johnson
Controls, Inc.

Controls on the interior rearview mirror

▷ LED, arrow 1.
▷ Buttons, arrow 2.
▷ The hand-held transmitter, arrow 3, is re‐
quired for programming.

Programming

General information


  1. Switch on the ignition.

  2. Initial setup:
    Press and hold the left and right button on
    the interior rearview mirror simultaneously
    for approximately 20 seconds until the LED
    on the interior rearview mirror flashes. This
    erases all programming of the buttons on
    the interior rearview mirror.

  3. Hold the hand-held transmitter for the sys‐
    tem to be controlled approx. 1 to 3 in/2.5 to
    8 cm away from the buttons on the interior


Controls Interior equipment

146
Free download pdf