Building Arduino Projects for the Internet of Things

CHAPTER 12 ■ IOT PLATFORMS

If the location of the device is important, you can set that from the Location section
as well, as shown in Figure  12-13. In this project, you are not going to be changing it from
code, so this will be just static that will show up on the dashboard.

Figure 12-12. SoilMoistureSensor1 channel

Figure 12-13. Add location

Click on Add Location and, as shown in Figure  12-14 , enter the location name
and address where your sensor is physically located. Location data is always useful for
maintenance purposes. Click Save.