5.6 HTS Maglev dynamic measurement system Ë 139Fig. 5.27:The design scheme and principal parts of the HTS Maglev dynamic test system
SCML-03 [12] (not including power supply and measurement control desk).
Fig. 5.28:Photo of the airframe of the HTS Maglev dynamic test system SCML-03 [12]: 3.3 m long,
2.4 m wide, and 3.15 m high, with a total weight of 13.95 t.
The three-dimensional measuring seat is fixed on the horizontal load. The seat can
be moved along the horizontal direction which is perpendicular to the tangential
direction of the circular PMG. Therefore, the HTS Maglev dynamic guidance force can
be measured at the same time. Six force sensors are used to measure the vertical, trans-
verse, and longitudinal directional forces of the liquid nitrogen vessel. To measure