References Ë 323[37]Del-Valle N, Sanchez A, Navau C, Chen DX. A theoretical study of the influence of
superconductor and magnet dimensions on the levitation force and stability of maglev
systems. Supercond Sci Technol. 2008;21:125008.
[38]Hennig W, Parks D, Weinstein R, Sawh RP. Enhanced levitation forces with field cooled
YBa 2 Cu 3 O 7 −훿. Appl Phys Lett. 1998;72(23):3059–3061.
[39]Vanderbemden P, Hong Z, Coombs TA, et al. Remagnetization of bulk high-temperature
superconductors subjected to crossed and rotating magnetic fields. Supercond Sci Technol.
2007;20(9):S174–S183.
[40]Coombs TA, Hong Z, Zhu X, Krabbes G. A novel heat engine for magnetizing superconductors.
Supercond Sci Technol. 2008;21:034001.
[41]Yang WM, Zhou L, Nicolsky R. The relationship of levitation force between individual discs and
double-layer disc YBa 2 Cu 3 O 7 −xsuperconductors. Supercond Sci Technol. 2003;16(4):451–454.
[42]Rudnev IA, Ermolaev YS. Non-additivity of magnetic levitation force. J Phys Conf Ser.
2006;43:983–986.
[43]Rudnev IA, Ermolaev YS. Effect of the characteristics of a superconductor on the levitation
properties of the magnet-superconductor system. J Exp Theor Phys. 2007;105(1):256–258.
[44]Shi DL, Lahiri K, Qu D, Sagar S. Surface nucleation, domain growth mechanisms, and factors
dominating superconducting properties in seeded melt grown YBa 2 Cu 3 Ox. J Mater Res Technol.
1997;12(11):3036–3045.
[45]Wang XR, Wang JS, Wang SY, Ren ZY, Song HH, Wang XZ, et al. The relationship of guidance
force between single and multiple cylindrical Y–Ba–Cu–O superconductors. Physica C.
2003;390:113–119.
[46]Liu W, Wang SY, Jing H, Zheng J, Jiang M, Wang JS. Levitation performance of YBCO bulk in
different applied magnetic fields. Physica C. 2008;468:974–977.
[47]Ren ZY, de Haas O, Wang XR, Song HH, Wang XZ, Jun Z, et al. Study of relationship of levitation
force between single and multiple YBCO bulk above a permanent magnetic guideway. China
J Low Temp Phys. 2003;25:182–186.
[48]Ueda H, Tsuchiya M, Ishiyama A. Development of pipeline transport system using pin-
ning effect of high-temperature superconducting bulks. IEEE Trans Appl Supercond.
2007;17(2):2323–2326.
[49]Walter H, Bock J, Frohne C, Schippl K, May H, Canders WR, et al. First Heavy Load Bearing for
Industrial Application With Shaft Loads Up To 10 kN. J Phys Conf Ser. 2006: 995–998.
[50]Floegel-Delor U, Rothfeld R, Wippich D, Goebel B, Riedel T, Werfel FN. Fabrication of HTS
bearings with ton load performance. IEEE Trans Appl Supercond. 2007;17(2):2142–2145.
[51]Hull JR. Topical review: Superconducting bearings. Supercond Sci Technol. 2000;13(2):R1–R15.
[52]Nagashima K, Otani T, Murakami M. Magnetic interaction between permanent magnets and
bulk superconductors. Physica C. 1999;328:137–144.
[53]Deng Z, Zheng J, Li J, Ma G, Lu Y, Zhang Y, Wang S, Wang J. Superconducting bulk magnet for
maglev vehicle: Stable levitation performance above permanent magnet guideway. Materials
Science and Engineering B. 2008;151:117–121.
[54]Wang XR, Ren ZY, Song HH, Wang XZ, Zheng J, Wang SY, et al. Guidance force in an infinitely
long superconductor and permanent magnetic guideway system. Supercond Sci Technol.
2005;18(2):S99-S104.
[55]Wang J, Wang S, Zheng J. Recent development of high temperature superconducting maglev
system in China. IEEE Trans Appl Supercond. 2009;19(3):2142–2147.
[56]Wang JS, Wang SY, Zheng J, et al. Magnetic rail construction methods of high temperature
superconducting maglev rail. Patent application 200710048306. 4, Aug. 24, 2011.
[57]Deng ZG, Zhang WH, Zheng J, et al. A high-temperature superconducting Maglev ring test line
developed in Chengdu, China. IEEE Trans Appl Supercond. 2016;26(6):3602408.