386 Ë 10 HTS Maglev launch technology
[17]Wang J, Wang S, Deng C, Zheng J, Song H, He Q, et al. Laboratory-scale high temperature
superconducting Maglev launch system. IEEE Trans on Appl Supercond. 2007;17(2):2091–
2094.
[18]Wang JS, Wang SY. Synthesis of bulk superconductors and their properties on permannent
magnet guideway. Frontiers in superconducting materials. Germany: Springer-Verlag;
2005:885–912.
[19]Wang S, Wang J, Deng C, Lu Y, Zeng Y, Song H, et al. An update high-temperature superconduc-
ting Maglev measurement system. IEEE Trans on Appl Supercond. 2007;17(2):2067–2070.
[20]Yang W, Qiu M, Liu Y, Wen Z, Duan L, Chen X. Levitation characteristics in an HTS Maglev launch
assist test vehicle. Supercond Sci Technol. 2007;20(3):281.
[21]Wen Z, Liu Y, Yang W, Qiu M. Experimental and numerical analysis of vibration stability for a
high-Tcsuperconducting levitation system. Supercond Sci Technol. 2007;20(1):100.
[22]Yang W, Liu Y, Wen Z, Chen X, Duan Y. Hysteresis force loss and damping properties in a practi-
cal magnet superconductor Maglev test vehicle. Supercond Sci Technol. 2008;21(21):015014.
[23]Li J, Fei Y, Zheng S, Wang S. Electromagnetic forces of High-Tc, superconducting coated
conductor coils subjected to sinusoidal traveling magnetic fields. J Low Temp Phys.
2014;174(1–2):87–95.
[24]Li J. PhD dissertation. Resarch on the force characteristics of high temperature superconductor
magnet under linear three-phase windings. Southwest Jiaotong University, Chengdu, China;
- (In Chinese).
[25]Li J, Fei Y, Zheng S, Wang S, Wang J. Normal force analysis on a high temperature superconduc-
ting linear synchronous motor. IEEE Trans on Appl Supercond. 2012;22(3):5200304.
[26]Yen F, Li J, Zheng SJ, Liu L, Ma GT, Wang JS. A single-sided linear synchronous motor with a
high temperature superconducting coil as the excitation system. Supercond Sci Technol.
2010;23(10):105015–105018(4).
[27]Zheng SJ, Yen F, Li J, Lin QX, Chen X, Zheng J, et al. Performance of a small-scale high
temperature superconducting linear synchronous motor prototype. IEEE Trans on Appl
Supercond. 2012;22(2):5200104.
[28]Fei Y, Zheng S, Chen X, Li J, Lin Q, Xu YY, et al. Superconducting excitation system of a small
scale linear synchronous motor. IEEE Trans on Appl Supercond. 2012;22(3):5201103.
[29]Jing HL, Zheng J, Liao XL, Deng ZG, Chen X, Yen F, et al. Magnetization Method design of bulk
multi-seeded high temperature superconductors. Mater Sci Forum. 2013;745–746:185–190.
[30]Li J, Wang S, Wang J, Yen F, Liu L, Zheng J, et al. Experimental study of the electromagnetic
forces of a HTS bulk magnet subjected to sinusoidal traveling magnetic field. IEEE Trans on
Appl Supercond. 2010;20(3):929–932.
[31]Sweetman W. Carrier. Launch system passes initial tests. Aviation week, June 6, 2010.
[32]Gieras JF. Linear induction drives. Oxford: Oxford University Press; 1994.
[33]Chen X. MS dissertation. Design and measurement of a small scale high temperature
superconducting linear induction motor prototype. Southwest Jiaotong University, Chengdu,
China, 2013. (In Chinese).
[34]Zheng J, Shi Y, He D, Jing H, Li J, Deng ZG, et al. Effect of the size of GdBCO-Ag secondary
magnet on the static forces performance of linear synchronous motors. Supercond Sci Technol.
2014;27(11):115016.