TOTAL HOURS 10
MODS THIS MONTH
GYTR tank, B&B bashplate
MODS NEXT MONTH
Motoz Hybrid tyre, GYTR pipe
and flywheel, ProBolt kit
With the YZ’s duties as a
pristine magazine photo model
completed with this month’s hit-
out against the Sherco 250SE-R
(page 42) it was time to hook into
some serious mods. ADB’s enduro
testing crew and freestyle motocross fans
had managed to leave boot marks on the
front guard and headlight with their heel
clicker routines but never mind.
At least it wasn’t too late to protect the
frame rails, by organising an alloy bashplate
from B&B Off-Road in Ballarat, Vic. These
guys have been around almost as long as the
YZ two-stroke so it was no surprise that they
had a jig to make the required component.
The B&B bashplate doesn’t go around the
expansion chamber but the stock exhaust
seems to be built tough enough to take a
few hits. Not having the extra protection
also avoided us having to worry about
whether the bashplate would clear the GYTR
by FMF Nickle Torque Exhaust that’s on its
way from Sydney.
We have fi nally managed to get the
hour meter into double fi gures and that
was partly thanks to the GYTR 12.1 litre
fuel tank, with its 50 per cent increase in
capacity over the stocker. Nothing like a
boost in (petrol) supply to increase demand.
There were no issues fi tting the tank, we
just swapped over the mounts and fuel tap
from the stock tank and fl ushed it out with
a few litres of petrol to make sure there
were no traces of plastic from the moulding
process. The tank is translucent so you can
watch the level go down but the radiator
shrouds stop it looking totally naked.
It does kick the shrouds out slightly,
particularly at the top, so we were a bit
worried about what would happen to them
in the tight. It’s also slightly wider between
the legs when sitting forward to
weight the front-end.
First stop was the Stradbroke
State Forest for a quick blast on
fi reroads and non-techo singletrack to
get that hour meter ticking over. We did
three laps of a 50km circuit at moderate pace
without breathing hard and it looked like the
GYTR tank was still good for another lap.
The main tracks had all been groomed
for the fi reys but didn’t look like they’d had
much use since then. It was pretty funny to
see rock wallabies come shooting out of the
new stormwater pipes under the road as we
approached. It was a hotday.
With the revised ergos, it seemed more
comfortable to keep standing and lean
forward to weight the fork. The extra fuel
certainly hadn’t stopped the YZ’s friskiness.
A couple of days later we were up at
the Toolangi State Forest trailriding area
with Editor Mitch Lees on the RMX450Z
long-termer. You couldn’t have more of a
contrast from Stradbroke, was lots of tight
singletrack, climbs and descents at Toolangi.
The terrain up there is an interesting mixture
of loam and rocky sections.
The stock gearing on the YZ-X was a little
high for this stuff but the bike reinforced
its reputation for being light and fl ickable.
Still, would’ve accepted a 5kg penalty to
have been able to use a start button before
Mitch turned up on some of those hills.
We did fi ll up the tank before this ride,
which wasn’t really necessary, and the stock
Dunlop AT81 rear is pretty fl ogged out for
hillclimbing so we’ll be back up at Toolangi
shortly to test out the latest changes.
There’s also the suggestion of some dirt
tracking at Broadford with a Motoz Hybrid
on the back. Mitch reckons I’ll eat dirt.
Wolter Kuiper
YAMAHA
YZ250X
COSTS
RRP: $10,990
Warranty: Three months parts
Distributor: Yamaha Australia,
Web: yamaha-motor.com.au
(02) 9757 0011
http://www.adbmag.com APRIL 2016 | 137
OPEN ALL HOURS
Finally the YZ-X has racked up some time in the forest
234
1