Tissue Engineering And Nanotheranostics

(Steven Felgate) #1

“9.61x6.69” b2815 Tissue Engineering and Nanotheranostics


Plasmonic Nanoparticles Application in Biosensor and Bioimaging 167

that it provides high contrast images and makes it possible to collect


the scattering light of plasmon nanoparticles at the single­particle


level. To date, DFM is widely utilized to monitor biological events,


such as protein association and overexpression. Many modifications to


the conventional dark­field system like employing different illumina­


tion methods, light sources and various CCDs, have been developed


to improve the signal and time resolution of DFM to identify single


molecular binding events.


4.1. Conventional Dark-Field Microscopy


In a typical DFM system, the white light of a Halogen lamp pass


through a condenser to tilt the incident illumination and are focused


at the sample to excite the plasmons. The condenser is equipped with


a circular block at the lens to permit light with high angular transmit.


Most of the light is directly transmitted through the sample and is not


collected by the objective below the stage because the numerical aper­


ture of objective is smaller than the condenser, causing the dark back­


ground. Only the scattered light from the sample could be collected


to image sample in true­color or to analyze single particle spectra.


4.2. Improvements in Sensitivity and the Speed of


Dark-Field Microscopy


The main limitation of conventional DFM is the low signal intensity


for nanoparticles smaller than 50 nm. To obtain sufficient SNR of


single nanoparticle, an intense light source and long recording time


(up to seconds) are both required, which makes DFM in suitable for


fast dynamic observation. To improve SNR and the temporal resolu­


tion, several optical modifications have been developed. Noji et al.


developed the objective­type evanescent illumination DFM by simply


replacing the dichroic mirror with a perforated mirror in a


conventional microscope.^13 In this system with total internal reflec­


tion (TIR)­illumination, the incident laser is reflected at the water–


glass interface and forms the evanescent field on the coverslip surface.


The evanescent field induces the oscillating dipoles within the

Free download pdf