Microfluidics for Biologists Fundamentals and Applications

developed a unique conductometric sensor which is a combination of interdigital electrode structures with imprinted polymers for ...

Impedimetric sensors measure the changes in impedance when biomolecules bind to the electrode hindering the electron transfer. B ...

6.3 Mass Based Sensing Mass based sensors rely on transduction of mechanical energy. Cantilever based mass sensors are the most ...

frequency shift to increase the sensitivity and eliminate the frequency tracking elements from the sensor has been reported by K ...

Quinto-Su PA, Lai HH, Yoon HH, Sims CE, Allbritton NL, Venugopalan V (2008) Exam- ination of laser microbeam cell lysis in a PD ...

Osborn JL, Barry L, Elain L, Peter K (2010) Microfluidics without pumps: reinventing the T-sensor and H-filter in paper network ...

Basu AK, Dwivedi P, Bhattacharya S (2016) Fabrication of 3-dimensional interdigited structure in microfluidic channel by one st ...

distance on the mobility and diffusion in DNA surface electrophoresis. Electrophoresis 27 (7):1312–1321 Lee HH, Kuo Y (2008) Su ...

PCR Micro Chip through system identification techniques. In: IEEE international symposium on computer-based medical system, pp 3 ...

Novell M, Parrilla M, Crespo G, Rius F, Andrade F (2012) Paper-based ion-selective potentiometric sensors. Anal Chem 84:4695–47 ...

Chapter 3 Manufacturing Methods Overview for Rapid Prototyping Nikolay Dimov 1 Motivation Microfabrication is seldom in the focu ...

usability. Accessibility to equipment and techniques are also indispensable part of the selection process. Scale of production i ...

across all production scales. These constrains define our next criteria—time. From the three enumerated methods milling is the o ...

Table 3.1 Physical properties of plastics commonly used for microfluidics Plastic Properties Mechanicalstrength Chemicalresistan ...

is one way of circumventing these apparent obstacles. There are adjacent services and team of professionals who can carry out an ...

features with various thicknesses, which can be controlled by the spin speed during coating. For exposure i-line (365 nm) is use ...

If it is manually dispensed from a small bottle it is recommended, to minimize the distance between the bottle and the substrate ...

substrate is transferred into a desiccator with 5μL of Triethoxy(1H,1H,2H,2H- perfluoro-1-octyl)silane. The desiccator is pumped ...

of replication. However, the polymer might degrade if the temperature is too high. Ideally, the temperature of the tool and subs ...

An optimised embossing process can use the same master over again without any wearing of its features or compromise of the repli ...