ISSUE 419 • GARAGE BUILD • 615
Remove the four 6mm bolts securing the stock
speedo mount to the bike.2
Stock 2018 Bobber headlight
1
Stock speedo on the 2018 Indian Bobber.
3
Remove the six 6mm Allen bolts securing the headlight
cowl, three bolts per side.
4
Remove the headlight cowl.6
Remove the stock speedo mount. At this point
you should place a towel over the tank in order to
protect the paint, we’ll be resting the speedo on
the tank for the next few steps.8
Slide the speedo forward and out of the stock
mounting bracket.7
Before being able to disconnect the main electrical
connector from the speedo you need to remove the
two T20 screws attaching the speedo to the stock
mounting bracket.9
Now disconnect the main wiring harness form the
speedo and discard the stock speedo mount.