34 Australian Wood Review- Slip joins were sawn on the tablesaw using a
tenoning jig. - A solid oak wall mount is sawn, fitted and glued into
the carcase. - A rebate for the cabinet back is routed in, stopping
short of the corners which are cleaned up square
with a mallet and chisel. - Tapered Japanese wooden nails secure the wall
mounting piece. After drilling and tapping in with
glue they are later flush cut. - The back has been glued in and secured with
tape. Japanese nails were used to strengthen the
mounting piece join and are shown here before
flush cutting. - The door frame rebate was routed, corners cleaned
up and glass fitted leaving a small clearance.
13
17
16
14
15
18