http://www.getwoodworking.com October 2019 The Woodworker & Good Woodworking 79
GO ONLINE
TO GET YOURFREE
RATED EXCELLENT CATALOGUE17,000 PRODUCTS IN STOCK FOR NEXT DAY DELIVERYLOW TRADE PRICES!0808 168 28 28 IronmongeryDirect.com14 Mark the centre of the top panel and drill for
the flex. Screw the threaded bulb holder base over
the hole15 Drill a 6mm hole at the lower end of one side to
enable the three-core flex to be pushed through easily18 The finished lamp base is quite hefty, so the bigger
the lampshade the better17 Strip the ends of the flex and screw to the bulb
holder, making sure that the earth wire is attached16 After sanding the box with fine abrasive, brush
on two coats of finishing oil before attaching the
top and base